Which cable products will have high market demand in 2024?(2)
New energy vehicles
New energy vehicle cables can be divided into in-car cables, charging pile cables and on-board charging cables according to different application scenarios. The rapid development of new energy electric vehicles has provided good market opportunities for its supporting cable industry. As vehicle manufacturers increase their investment in the field of new energy vehicles, vehicle electrification has become a general trend, and new energy vehicle cables will also usher in new growth points. It is expected that the size of my country's automotive cable market will reach 18.06 billion yuan in 2025. Whether from the perspective of industrial transformation or energy strategy, the prospects of new energy automobile cables are very broad. In the next five years, the field of new energy automobile cables will usher in huge development space.
Marine construction
China's submarine cable industry has shown a fluctuating upward trend in recent years. In 2020, driven by the "rush to install" offshore wind power, the size of the submarine cable market increased significantly by 12.64% year-on-year, reaching approximately 13.4 billion yuan, reaching its peak in recent years. Based on the future demand for offshore wind power, international communication network upgrades, and offshore oil platform development in multiple application fields, China's submarine cable market is expected to reach 20 billion yuan in 2027, with a compound annual growth rate of approximately 6%.
Special equipment
At present, industries such as shipbuilding, rail transportation, clean energy, aerospace, petrochemicals, and new energy vehicles all require the use of a large number of special cables. With the advancement of science and technology, the transformation and upgrading of traditional industries, and the vigorous development of strategic emerging industries and high-end manufacturing, my country's economy and society are further developing towards safety, environmental protection, low-carbon energy conservation, informatization, and intelligence. The construction and modernization of national smart grids Urban construction, large-scale transformation of urban and rural power grids, and new energy power station construction have put forward higher requirements for the application of wires and cables, which also provide new development opportunities for the development of special wires and cables.
Which cable products will have high market demand in 2024?(1)
The wire and cable market is a key infrastructure market. With economic development and technological advancement, the demand for wire and cable continues to increase. In the next few years, including 2024, some cable markets will develop significantly, and some cable products will usher in broad market demand. Some people believe that markets are currently relatively stable and will continue to improve in the future, such as the following markets:
Power grid construction
my country's power grid construction is still in the development stage. The higher the voltage level, the more conducive to long-distance power transmission. In the future, large-scale cross-regional power grid construction in China will require long-distance power transmission. Currently, judging from the construction planning of high-voltage and ultra-high-voltage lines, supporting cables The demand is on the rise. According to the State Grid's plan, investment will increase to 520 billion yuan in 2023, a year-on-year increase of 4%. Power grid investment and new infrastructure are the driving force for the development of the cable market.
Photovoltaic/energy storage/hydrogen energy market
The energy sector is an important area of the wire and cable market. With the continuous development of my country's photovoltaic industry, my country's photovoltaic cable industry will still be in a stage of rapid development. It is expected that the size of my country's photovoltaic cable market will reach 18.56 billion yuan in 2023. In recent years, in order to implement the country's strategic deployment of "dual carbon" goals and promote the green and low-carbon transformation of energy, the Chinese government has introduced a series of policies and measures. In the next few years, new energy industries such as photovoltaics, wind power, and energy storage will maintain rapid growth, and the rapid development of their industries will promote the development of photovoltaic cable companies.
Thirty cable common problem knowledge popularization（5）
23. Where are the inner shielding layer and outer shielding layer of power cables located? What materials are used? What does it do?
Answer: In order to have better contact between the insulation layer and the cable conductor and eliminate the increase in electric field intensity on the conductor surface caused by the roughness of the conductor surface, the conductor surface is generally covered with an inner shielding layer of metallized paper or semiconductor paper tape. In order to ensure better contact between the insulation layer and the metal sheath, an outer shielding layer is generally wrapped around the insulation layer. The outer screen layer is made of the same material as the inner screen layer, and sometimes it is also bound with copper tape or braided copper wire tape.
24. What should we pay attention to during the transportation, loading and unloading of cables?
Answer: (1) During transportation, loading and unloading, cables and cable drums should not be damaged. It is strictly forbidden to push cable drums directly off the vehicle. Cables should generally not be transported or stored flat.
(2) Before transporting or rolling the cable drum, it must be ensured that the cable drum is firm and the cable is wound tightly. The oil pipe between the oil-filled cable and the pressure oil tank should be fixed and not damaged. The pressure oil tank should be secure and the pressure indication should meet the requirements.
25. What aspects should be considered when selecting the cross-section of power cables?
Answer: The following aspects should be considered:
(1) The long-term operating current allowed by the cable;
(2) Thermal stability in the event of short circuit;
(3) The voltage drop on the line cannot exceed the allowable working range.
26. What are the advantages of power cables compared with overhead lines?
Answer: (1) Reliable operation. Because it is installed in hidden places such as underground, it is less damaged by external forces and has fewer chances of failure. The power supply is safe and will not cause harm to people;
(2) The maintenance workload is small and frequent inspections are not required;
(3) No need to erect poles and towers;
(4) Helps improve power factor.
27. What measures are taken to prevent cable fire?
Answer: (1) Use flame-retardant cables;
(2) Use fireproof cable brackets;
(3) Use fire retardant coatings;
(4) Fire partition walls and fire baffles should be installed at cable tunnels, mezzanine exits, etc.;
(5) Overhead cables should avoid oil pipelines and explosion-proof doors. Otherwise, local pipe penetration or heat insulation and fire prevention measures should be taken.
28. What is a cable failure? How many common types are there?
Answer: Cable failure refers to the failure of insulation breakdown of the cable during preventive testing or the failure of the cable line to cause a power outage due to insulation breakdown, wire burnout, etc. during operation. Common faults include ground faults, short circuit faults, disconnection faults, flashover faults and mixed faults.
29. According to the "Regulations on Safety in Electrical Industry", what are the conditions that electrical workers must meet?
Answer: The following conditions must be met:
(1) Healthy as determined by a doctor, with no illness that would hinder work;
(2) Have necessary electrical knowledge, master relevant procedures, professional techniques and safe operation techniques according to their duties and nature of work, and pass the examination;
(3) Be proficient in first aid methods for electric shock.
30. Where are the inner shielding layer and outer shielding layer of power cables located? What materials are used? What does it do?
Answer: In order to have better contact between the insulation layer and the cable conductor and eliminate the increase in electric field intensity on the conductor surface caused by the roughness of the conductor surface, the conductor surface is generally covered with an inner shielding layer of metallized paper or semiconductor paper tape. In order to ensure better contact between the insulation layer and the metal sheath, an outer shielding layer is generally wrapped around the insulation layer. The outer screen layer is made of the same material as the inner screen layer, and sometimes it is also bound with copper tape or braided copper wire tape.
Thirty cable common problem knowledge popularization（4）
18. What are the requirements for the mechanical strength of cable conductor connection points?
Answer: The mechanical strength of the connection point is generally lower than the tensile strength of the cable conductor itself. For fixedly laid power cables, the tensile strength of the connection point is required to be no less than 60% of the tensile strength of the conductor itself.
19. What are the main properties of the insulation layer material of power cables?
Answer: It should have the following main properties:
(1) High breakdown strength;
(2) Low dielectric loss;
(3) Quite high insulation resistance;
(4) Excellent discharge resistance;
(5) Has certain softness and mechanical strength;
(6) The insulation performance is long-term and stable.
20. The applications of wires and cables are mainly divided into three categories:
(1), power system
The wire and cable products used in the power system mainly include overhead bare wires, busbars (busbars), power cables (plastic cables, oil-paper power cables (basically replaced by plastic power cables), rubber sheathed cables, overhead insulated cables), branch cables (replacing some busbars), electromagnetic wires, and electrical equipment wires and cables for power equipment, etc.
(2), Information transmission system
The wires and cables used in information transmission systems mainly include local telephone cables, television cables, electronic cables, radio frequency cables, optical fiber cables, data cables, electromagnetic wires, power communication or other composite cables, etc.
(3), mechanical equipment, instrumentation systems
In addition to overhead bare wires, almost all other products in this section are applied, but mainly power cables, electromagnetic wires, data cables, instrumentation cables, etc.
21. Wire and cable products are mainly divided into five categories:
(1), Bare wires and bare conductor products
The main characteristics of this type of product are: pure conductor metal, without insulation and sheath layers, such as steel core aluminum stranded wire, copper aluminum busbar, electric locomotive wire, etc.; the processing technology is mainly pressure processing, such as smelting, rolling, drawing system, stranding/compression stranding, etc.; the products are mainly used in suburban areas, rural areas, user main lines, switch cabinets, etc.
(2), power cable
The main features of this type of product are: extruding (winding) the insulation layer on the conductor, such as overhead insulated cables, or twisting several cores (corresponding to the phase line, neutral line and ground wire of the power system), such as overhead insulated cables with more than two cores , or add a sheath layer, such as plastic/rubber sheathed wire and cable. The main process technologies include drawing, stranding, insulation extrusion (wrapping), cabling, armoring, sheath extrusion, etc. There are certain differences in the different process combinations of various products.
The products are mainly used in the transmission of strong electric energy in generation, distribution, transmission, transformation and power supply lines, with large currents (tens of tens of amps to thousands of amps) and high voltages (220V to 500kV and above).
(3) Wires and cables for electrical equipment
The main features of this type of products are: a wide range of varieties and specifications, a wide range of applications, most of the operating voltages are 1kV and below, and new products are constantly derived for special occasions, such as fire-resistant cables, flame-retardant cables, low-smoke halogen-free/low-smoke Smoke-resistant low-halogen cables, termite-proof, mouse-proof cables, oil-resistant/cold-resistant/temperature-resistant/wear-resistant cables, medical/agricultural/mining cables, thin-walled wires, etc.
(4), communication cables and optical fibers (brief introduction)
With the rapid development of the communications industry in the past two decades, products have also developed at an alarming rate. From the simple telephone and telegraph cables in the past, it has developed into thousands of pairs of voice cables, coaxial cables, optical cables, data cables, and even combined communication cables.
The structural dimensions of such products are usually small and uniform, and require high manufacturing precision.
(5), electromagnetic wire (winding wire)
Mainly used in various motors, instruments, etc.
Derivatives/new products of wires and cables are mainly due to different application situations, application requirements, convenience of equipment, and reduction of equipment costs. They use new materials, special materials, or change the product structure, or improve process requirements, or will be different. A variety of products are produced by combining them.
Use different materials such as flame-retardant cables, low-smoke halogen-free/low-smoke low-halogen cables, termite-proof, mouse-proof cables, oil-resistant/cold-resistant/temperature-resistant cables, etc.; change the product structure such as: fire-resistant cables, etc.; improve technology Requirements such as: medical cables, etc.; combined products such as: OPGW, etc.; convenient installation and reduced equipment costs, such as: prefabricated branch cables, etc.
22. What requirements should be met when laying cables?
Answer: The following requirements should be met:
(1) In terms of safe operation, try to avoid all kinds of external damage and improve the power supply reliability of cable lines;
(2) Economically, consider the aspect of saving the most investment;
(3) In terms of construction, the path of the cable line must be convenient for work and maintenance after operation.
Thirty cable common problem knowledge popularization（3）
11. What should be stated on the cable sign? What are the requirements for writing?
Answer: The cable line design number, cable model, specification and starting point should be indicated on the signboard. Cables used in parallel should have sequence numbers. The handwriting is required to be clear and not easy to fall off.
12. How should the yellow wax silk ribbon, black glass paint ribbon, alkali-free glass ribbon, etc. used for making cable joints be dehumidified before construction?
Answer: ① Constant temperature drying method: roll the insulating tape into a small roll with a diameter of 25~30mm, put it into a constant temperature drying oven at 110~120℃ for 4~5 hours, cool and dry, take it out, and put it into a dry sealed cylinder.
②Oil immersion moisture drainage method: Put the small roll of insulation tape into the cable oil with a constant temperature of 120~130℃, keep a distance of 30mm from the bottom of the pot. After a certain period of time, the oil surface will no longer produce foam, take it out, and put it into the stored cable. In oil barrels, the oil level should exceed all contained objects and be sealed.
13. What is the function of the cable outer sheath?
Answer: Protect the inner protective layer from mechanical damage and chemical corrosion and enhance mechanical strength.
14. What requirements should outdoor cable trenches meet?
Answer: The upper part of the cable trench should be slightly higher than the ground and covered with a concrete cover. The cables should be laid flat on the bracket and have good drainage pipes.
15. What is the function of the inner sheath of the cable?
Answer: Keep the insulation layer from coming into contact with water, air or other objects, prevent the insulation from getting damp and prevent the insulation layer from mechanical damage.
16. What should you pay attention to when using wire cutters?
Answer: Before use, be sure to check whether the insulation of the insulated handle is intact. Do not use wire cutters to cut metal wires exceeding the specifications allowed. It is also prohibited to use wire cutters instead of hammers to hit the tool to avoid damage.
17. What is insulation strength?
Answer: When an insulating material is in an electric field, it will be broken down when the electric field intensity increases to a certain limit. This electric field intensity that leads to insulation breakdown is called insulation strength.
Thirty cable common problem knowledge popularization（1）
1. What are the types of commonly used wires and cables according to their uses?
Answer: According to the purpose, it can be divided into bare wires, insulated wires, heat-resistant wires, shielded wires, power cables, control cables, communication cables, radio frequency cables, etc.
2. What kinds of insulated wires are there?
Answer: Common insulated wires are as follows: PVC insulated wire, PVC insulated flexible wire, nitrile polyvinyl chloride mixture insulated flexible wire, rubber insulated wire, agricultural underground direct buried aluminum core plastic insulated wire, rubber insulated cotton yarn Textile flexible wires, PVC insulated nylon sheathed wires, PVC insulated flexible wires for electricity and lighting, etc.
3. What are the cable accessories?
Answer: Commonly used electrical accessories include cable terminal junction boxes, cable intermediate junction boxes, connecting pipes and terminals, steel plate junction slots, cable trays, etc.
4. What is the cable intermediate joint?
Answer: The device that connects the conductor, insulation shielding layer and protective layer of the cable to the cable to connect the cable line is called the cable intermediate joint.
5. What aspects should be considered when selecting the cross section of the power cable?
Answer: The following aspects should be considered:
(1) The working current that the cable is allowed to pass through for a long time;
(2) thermal stability in case of short circuit;
(3) The voltage drop on the line cannot exceed the allowable working range.
IEA: Global solar power overtakes coal power within four years
The International Energy Agency recently stated that by 2027, solar power generation is expected to surpass coal-fired power generation and become the main way of generating electricity. So, why is solar power likely to become the main force of new energy in the future?
More than a decade ago, solar energy was insignificant in the global energy race, accounting for the smallest share of all major sources of electricity, less than 1%. But things have changed now, with the International Energy Agency (IEA) saying that within three years, solar will generate more electricity than natural gas. Within four years, by 2027, it could overtake coal as the dominant form of electricity generation.
Solar electricity installation costs have dropped dramatically in recent years
An important reason is that the installation cost of solar power has dropped significantly. Data show that for utility-scale solar energy, the average cost of construction and operation has continued to decline since 2009, and will only be about $36 per megawatt-hour by 2021, a drop of about 90% compared to 2009. The cost of coal has changed little, at about $108 per megawatt-hour in 2021. Bahar, an analyst for the International Energy Agency's renewable energy market, said that solar power is expected to account for almost 60% of new power installations in the next five years.
Governments are increasingly paying attention to the development of renewable energy
In addition, in recent years, governments of various countries have paid more and more attention to energy security, and have also introduced corresponding policies to support it. According to the EU plan, by 2025, its installed capacity of solar photovoltaic power generation will more than double that of 2020, reaching 320 GW, and by 2030 it will reach 600 GW. The U.S. Inflation Reduction Act is expected to allow solar developers to enjoy certain tax credits within 10 years to carry out long-term and large-scale construction.
Home solar power market has broad prospects
Another point that cannot be ignored is that the construction scale of solar energy can be large or small. In addition to huge arrays, it can also be a single battery panel on the roof. Therefore, household solar power generation is also an important market. The CEO of a solar energy company in the United States mentioned in an interview with CNBC that the surge in demand for electric vehicles today may also drive the demand for household solar power generation in the future because it is convenient, cheap and reliable.
High performance cable should provide the best in durability, flexibility and shielding!
Cable manufacturers are constantly challenged with wider temperature ranges, more shielding functions and higher mechanical durability, as well as characteristics such as bending resistance and chemical resistance required for extremely harsh environments and increasingly complex applications. However, cable failures and system downtime still occur from time to time, why?
Cable Faults Many problems caused by cable faults, especially those operating in extreme and harsh environments, can be avoided if the cables are selected correctly from the outset. People might say that choosing a cable is easy, but is that really the case? Indeed, matching the correct temperature range and relying on a PVC jacket for protection is simple. However, there are far more issues to consider.
Engineers have many details to consider before finalizing a perfectly matched cable. Flex and flex cables require specific flex shields. When the shield is torn and continuity is lost, the choice of standard foil shielding can lead to system failure. The distinction between flexibility and bendability should be kept in mind. It is important that the cables be able to be bent and fitted, the flexible cables are easier to install and also simplifies fault detection in cabinets and cable trays.
When the cable is used to connect to the cabinet, the round cable provides a better seal than the typical spiral cable. Therefore, it is necessary to correctly select the degree of bending after considering the line. In some manufacturing applications, cables will be constantly being bent. Ability to withstand millions of bends is more complicated than flexibility. So, how to choose a curved cable? The first thing to consider is the type of bending, is it uniaxial, twisted, or multi-axial? Each type requires different characteristics of the cable.
How to select cable outer sheath?
The choice of cable sheath should be made in accordance with the requirements of relevant standards in combination with different situations.
1 The selection of cable sheath should meet the following requirements:
1.1 For single-core power cables in AC systems, when it is necessary to enhance the cable’s resistance to external forces, non-magnetic metal armor layers should be used, and steel armor without effective non-magnetic treatment should not be used.
1.2 For cables in humid, chemically corrosive environments or susceptible to water immersion, the metal layer, reinforcement layer, and armor should have polyethylene outer sheaths, and the thick steel wire armor of cables in water should have extruded outer sheaths.
2. The selection of the outer sheath of the cable during direct burial laying shall meet the following requirements:
2.1 When the cable is subjected to high pressure or has the risk of mechanical damage, it should have a reinforcement layer or steel tape armor.
2.2 In the soil where displacement may occur, such as quicksand layer and backfill land zone, the cable should be armored with steel wire.
2.3 For extruded cables used in areas seriously endangered by termites, outer sheaths with higher hardness should be selected, or thin outer sheaths with higher hardness can be extruded on ordinary outer sheaths. The material can be nylon or special polyolefin copolymerized Objects, etc., can also be armored with metal sleeves or steel tapes.
3. The selection of cable sheath for fixed laying in the air shall meet the following requirements:
3.1 When the small cross-section extruded plastic insulated cables are directly laid on the arm support, they should be armored with steel tape.
3.2 In places with high safety requirements and serious rodent infestation, such as underground passenger transportation and commercial facilities, plastic insulated cables should be armored with metal tape or steel tape.
3.3 When the cables are under high-drop force conditions, the multi-core cables shall be armored with steel wires, and the AC single-core cables shall comply with the provisions of Item 1
4 The selection of cable sheath for underwater laying shall meet the following requirements:
4.1 Steel tape armoring can be used for cables that do not require armored layers to bear tension in ditches, unnavigable creeks, etc.
4.2 For cables in rivers, lakes and seas, the type of steel wire armor selected should meet the stress conditions. When the laying conditions have protection requirements such as mechanical damage, the outer sheath that meets the protection and corrosion resistance enhancement requirements can be selected.
What are the purposes and selection principles of rubber sheathed cables?（1）
Among our commonly used power cables, rubber sheathed cables are also one of them. Rubber sheathed cable is a kind of soft and movable cable with multi-strand thin copper wire as conductor, rubber insulation and rubber sheath. Generally speaking, it includes general-purpose rubber-sheathed flexible cables, electric welding machine cables, submersible motor cables, radio device cables, and photographic light source cables. So what are the uses of rubber sheathed cables and what are the selection principles? Here is a brief introduction.
Application of Rubber-sheathed Cables Rubber-sheathed cables are widely used in various electrical equipment, such as household appliances, electric machinery, electrical equipment and portable power cords for appliances, and can be used indoors or outdoors. According to the external mechanical force of the cable, the product structure is divided into three types: light, medium and heavy, and there are appropriate connections in the section. Generally, light-duty rubber-sheathed cables are used in household appliances and small electric equipment, requiring softness, lightness, and good bending performance; medium-duty rubber-sheathed cables are widely used in agricultural electrification except for industrial use, and heavy-duty cables are used in such as port machinery, searchlights, Large-scale hydraulic irrigation and drainage stations for family business and other occasions. This type of product has good versatility, complete series of specifications, good and stable performance.
How to identify the advantages and disadvantages when purchasing wires?
First of all, look at the color. The copper core is yellowish and reddish, indicating that the quality of the copper used is better, while the yellowish white is the reaction of low-quality copper. For aluminum core wires, regular ones must be shiny, shining silver-white light under the light, while those that are dark and look dark are of poor quality.
Secondly, bend the wire by hand to test its toughness. A good wire has good toughness and can be bent very well. Some unqualified wires are bent a few times and their insulation layer is broken, and some can even be peeled off by hand. Insulation.
Then, it must be checked whether the length and the thickness of the wire core have been tampered with. According to the relevant standards, the error of the length of the wire cannot exceed 5%, and the diameter of the cross-section cannot exceed 0.02%. Short of two catties, the phenomenon of falsification on the cross-section.
Also intercept a section of insulation to see if its core is in the middle of the insulation. What is not centered is the phenomenon of core eccentricity caused by low craftsmanship. When using it, if the power is low, it will be safe. Once the amount is large, the thinner side is likely to be broken down.
Finally, we can also check whether the identification is complete. There should be the name of the cable factory, wire model, specification, cross-sectional area, length, rated voltage, date of manufacture, and the implemented certification number or certification mark. If these signs are incomplete or absent, consumers should be cautious when purchasing.
.
Types and properties of common flame-retardant wires and cables
1. Ordinary flame-retardant wires and cables
The insulating and sheathing materials of ordinary flame-retardant wires and cables are generally polymer materials containing halogen (or modified by adding halogen containing flame retardant). Polyvinyl chloride (PVC) is commonly used. Ordinary PVC resin has the characteristics of high electrical insulation, chemical resistance, abrasion resistance, aging resistance and low price. However, when PVC burns, it will release hydrogen chloride, carbon monoxide, carbon dioxide, various aromatic hydrocarbons, chlorinated compounds and other toxic and harmful gases.
2. Low smoke halogen-free flame retardant wire and cable
The insulation and sheath materials of low smoke and halogen-free flame-retardant wires and cables are mostly thermoplastic elastomer materials, which do not contain halogens such as fluorine, chlorine, bromine and iodine. Mercury, chromium, cadmium, lead and other heavy metal elements that pollute the environment are excluded from the production process. Polyamide is often used as the material. The flame-retardant mechanism of this cable is that of interrupt switching. Interrupted exchange flame retardant refers to taking away part of the heat generated during the combustion of flame retardant materials, so that the materials can not maintain the thermal decomposition temperature, and therefore can not continue to produce combustible gas, so the combustion is self extinguished.
Zhenglan Cable Technology Co., Ltd manufacture flame retardant wire, low smoke halogen-free flame retardanet wire, fire resistant wire, flame retardant and fire resistant wire. Welcome your inquiry.
Why Single core Armored Cable Should Use Non magnetic Materials？
When a single core cable is started or stopped by alternating current or direct current, a corresponding alternating magnetic field will be generated around the cable, and an induced current will be generated in the metal material. This current flows inside the metal material, much like a vortex of water, so it is called eddy current, or eddy current for short. The thermal effect of eddy current can heat the metal materials in a short time. If the heat cannot be emitted in time, it will cause the cable insulation layer to melt or accelerate the aging, and the insulation performance will be weakened, thus causing cable breakdown.
The armored steel strip has good magnetic conductivity, which can be magnetized under a small magnetic field and generate eddy current. Non magnetic materials such as stainless steel tape, copper tape, aluminum tape or non-magnetic metal wire shall be used for armouring of single core cables.
In addition, it is better to lay single core cables in finished form during construction. Single core cables should avoid magnetic materials as far as possible, such as iron pipes, iron clamps, etc., which can form closed loop magnetic materials.
In addition, for a three core cable, the alternating magnetic fields generated by the three core phase relationship cancel each other, so that the sum of the induced current vectors is 0, and no magnetic force lines pass through the armor. Therefore, steel tape armouring can be used.
Importance of power cable sheath
Power cables are widely used to transmit and distribute electric energy. They are often used in urban underground power grids, outgoing lines of power stations, internal power supply of industrial and mining enterprises, and underwater transmission lines across rivers and seas.
The main lines in the power system are generally power cables used to transmit and distribute high-power electric energy, including 1-500kv and above voltage levels. Therefore, the quality of cable products is very important, and the quality and thickness of cable sheath are equally important.
What effect does the thickness of cable sheath have on the cable?
1. Affect the service life of power cables
The first is the environment. After the construction of power cables, they are basically buried in the ground, immersed in water, in the open air or in an environment prone to corrosion, plus the corrosion of external media for a long time, the insulation level and mechanical level of the thinnest point of the cable sheath will decline. In case of line grounding fault, the thinnest point of cable sheath may be broken down, increasing the hidden danger of safety accidents.
The other is the internal consumption of heat energy generated by cables. The cable will produce a lot of heat energy in the process of transmitting electric energy, which is a consumption of the sheath. If the thickness of the cable sheath is not enough, the copper core of the conductor will directly melt the sheath material after heating, which will cause circuit failures and other related safety problems.
2. Impact on Construction
According to the current requirements, more and more environmental requirements require that the outer diameter of high-voltage cable products must be small, and it is necessary to consider leaving gaps in the laying process, so as to dissipate the heat generated by the cable after it is powered on. The thickness of the sheath is too thick, which will increase the difficulty of laying, so the thickness of the cable sheath must strictly comply with the relevant national standards, otherwise it cannot protect the cable conductor.
Power transmission steps
Transmission process
The transmission of electric energy, together with power transformation, distribution and consumption, constitutes the overall function of the power system. Through power transmission, the power plants far away (up to thousands of meters) are connected with load centers, so that the development and utilization of electric energy go beyond the regional limits.
Transmission lines can be divided into overhead transmission lines and underground transmission lines according to their structural forms. The former consists of line towers, conductors and insulators, which are erected on the ground; The latter is mainly laid underground (or underwater) with cables. Transmission can be divided into DC transmission and AC transmission according to the nature of the transmitted current.
This process uses different types or overhead bare conductors such as AAC, AAAC, ACSR, etc.
Transformation process
In the power system, the power plant converts the natural primary energy into electric energy and sends power to the remote power users. In order to reduce the power loss on the transmission line and the line impedance voltage drop, it is necessary to increase the voltage; In order to meet the security needs of power users, the voltage should be reduced and distributed to each user, which requires a substation that can increase and decrease the voltage and distribute power. Therefore, the substation is an electrical device in the power system that converts voltage, receives and distributes electric energy through it. It is an intermediate link between the power plant and power users. At the same time, the power grid of various voltage levels is connected through the substation. The function of the substation is to transform voltage, transmit and distribute electric energy. The substation is composed of power transformer, power distribution device, secondary system and necessary auxiliary equipment.
The transformer is the central equipment of the substation, which uses the principle of electromagnetic induction.
This process uses different types of cables such as high voltage, medinum voltage and low voltage power cable, aerial bundled cable, electrical wires.
Introduction to the use of cables and materials commonly used in solar photovoltaic power stations
During the construction of a solar photovoltaic power station, in addition to the main equipment, such as photovoltaic modules, inverters, and step-up transformers, the photovoltaic cable materials connected to the photovoltaic power station have the same effect on the overall profitability, operation safety, and high efficiency of the photovoltaic power station. plays a vital role..
According to the system of solar photovoltaic power station, cables can be divided into DC cables and AC cables. According to the different uses and use environments, they are classified as follows:
1. DC cable
(1) Serial cables between components.
(2) Parallel cables between the strings and between the strings and the DC distribution box (combiner box).
(3) The cable between the DC distribution box and the inverter.
The above cables are all DC cables, and there are many outdoor layings. They need to be moisture-proof, sun-proof, cold-resistant, heat-resistant, and UV-resistant. In some special environments, they also need to be protected from chemicals such as acid and alkali.
2. AC cable
(1) The connecting cable from the inverter to the step-up transformer.
(2) The connecting cable from the step-up transformer to the power distribution device.
(3) The connecting cable from the power distribution device to the power grid or the user.
This part of the cable is an AC load cable, which is laid in the indoor environment and can be selected according to the general power cable selection requirements.
3. Photovoltaic special cable
A large number of DC cables in photovoltaic power plants need to be laid outdoors, and the environmental conditions are harsh. The cable materials should be determined according to the resistance to ultraviolet rays, ozone, severe temperature changes and chemical erosion. The long-term use of ordinary material cables in this environment will cause the cable sheath to be fragile, and even decompose the cable insulation. These conditions will directly damage the cable system, but also increase the risk of short-circuiting the cable. In the medium and long term, the possibility of fire or personal injury is also higher, which greatly affects the service life of the system.
4. Cable conductor material
Most of the DC cables used in photovoltaic power plants work outdoors for a long time. Due to the limitation of construction conditions, connectors are mostly used for cable connection. Cable conductor materials can be divided into copper core and aluminum core.
5. Cable insulation sheath material
During the installation, operation and maintenance of photovoltaic power plants, cables may be routed in the soil below the ground, in overgrown rocks, on the sharp edges of roof structures, or exposed to the air, and the cables may be impacted by various external forces. If the cable jacket is not strong enough, the cable insulation will be damaged, affecting the service life of the entire cable, or causing problems such as short circuits, fire and personal injury hazards.
The Hazards of Moisture to Power Cable
The rapid development of electric power industry has promoted the development of the electrical industry supporting the electric power industry, especially the wire and cable industry. The variety development of wire and cable shows a diversified trend. Wires and cables have developed from simple power transmission to multi-function, that is, some new characteristics have been added according to different uses, such as the water resistance requirements of power cables. With the deepening of the research and understanding of insulation water absorption and water tree, people are more and more aware of the importance of waterproof performance for medium and high voltage power cables. In areas with high groundwater level or perennial rainfall. More and more users require waterproof performance for cables.
After water is immersed in the cable, the main influence is on the conductor and insulation of the cable. As far as the conductor is concerned, the cable is in a thermal stable state during normal operation, and the conductor temperature is generally above 60. If there is water immersion, it will lead to conductor oxidation and increase the energy loss resistance between conductor single wires, which increases the conductor resistance and the energy loss of transmission line,
In terms of insulation, although polyethylene is a non-polar hydrophobic material that is very difficult to dissolve in water, polyethylene is a semi crystalline polymer composed of crystalline phase and amorphous phase. The phase structure of polyethylene is compact, but there are defects at the grain boundary; The molecular arrangement in the amorphous phase is loose. There is a large gap between molecules. Water molecules are polar. Under the combined action of diffusion force and electric field force under alternating electric field, water molecules can easily penetrate into the capacity gap of amorphous phase and grain boundary defects of crystalline phase of polyethylene. The above problems also exist in the molecular structure of cross-linked polyethylene. At the same time, there are many cross-linked by-products in cross-linked polyethylene as impurities, so cross-linked polyethylene also has large water absorption under alternating electric field. Cross linked polyethylene and polyethylene insulation will produce water tree after absorbing water, which will cause breakdown and damage to the running cable.
Zhenglan Cable Technology Co., can do radinal water prevention structure by adding water prevention tape into different layer of the MV cable. If you are looking for such performance for MV cable, please come to us.
What are the advantages of copper core cable over aluminum core cable?
1. Low resistivity: the resistivity of aluminum core cable is about 1.68 times higher than that of copper core cable.
2. Good ductility: the ductility of copper alloy is 20 ~ 40%, that of electrical copper is more than 30%, and that of aluminum alloy is only 18%.
3. High strength: the allowable stress of copper is 7 ~ 28% higher than that of aluminum at room temperature. Especially the stress at high temperature, the difference between the two is very far.
4. Fatigue resistance: aluminum is easy to break after repeated bending, while copper is not. In terms of elasticity index, copper is also about 1.7 ~ 1.8 times higher than aluminum. (low voltage power cable, medinum voltage power cable)
5. Good stability and corrosion resistance: copper core is resistant to oxidation and corrosion, while aluminum core is vulnerable to oxidation and corrosion.
6. Large current carrying capacity: due to low resistivity, the allowable current carrying capacity (maximum current that can be passed) of copper core cable with the same section is about 30% higher than that of aluminum core cable
7. Low voltage loss: due to the low resistivity of copper core cable, when the same current flows through the same section. The voltage drop of copper core cable is small. The same transmission distance can ensure high voltage quality; Under the condition of allowable voltage drop, the transmission of copper core cable can reach a long distance, that is, the power supply coverage area is large, which is conducive to network planning and reduce the number of power supply points.
8. Low heating temperature: under the same current, the heating capacity of copper core cable with the same section is much smaller than that of aluminum core cable, making the operation safer. (Aluminum conductor steel reinforced, ACSR)
9. Low energy consumption: due to the low resistivity of copper, compared with aluminum cable, the power loss of copper cable is low, which is obvious. This is conducive to improving the utilization rate of power generation and protecting the environment.
10. Oxidation resistance and corrosion resistance: the connector of copper core cable has stable performance and will not cause accidents due to oxidation. The joint of aluminum core cable is unstable, and accidents often occur due to the increase of contact resistance and heating due to oxidation. Therefore, the accident rate is much higher than that of copper core cable.
11. Convenient construction:
The copper core has good flexibility and small allowable bending radius, so it is convenient to turn and pass through the pipe;
The copper core is anti fatigue and not easy to break after repeated bending, so the wiring is convenient;
The copper core has high mechanical strength and can bear large mechanical tension, which not only brings great convenience to the construction and laying, but also creates conditions for mechanized construction. (overhead insulated cable, electrical control cable)
How to reasonably choose the conductors of overhead lines?
1. The principle of wire selection
The conductor and ground wires of power transmission lines operate in the wilderness, mountainous areas or the edge of lakes and seas for a long time, and need to withstand the effects of external loads such as wind and ice, drastic changes in temperature and attack by chemical gases, etc., and are also subject to national resources and line costs And other factors. Therefore, in the design, especially for large spans, the material and structure of the wires must be carefully selected.
Generally, the following principles should be considered when selecting the material and structure of the wire:
⑴ The conductor material should have high conductivity. However, considering national resources, copper wires should not be used in general.
⑵The conductor and ground wire should have high mechanical strength and vibration resistance.
⑶ The conductor and ground wire should have certain chemical resistance and oxidation resistance.
⑷ When choosing the wire material and structure, in addition to meeting the transmission capacity, the cost of the line should be economical and technically reasonable.
2. Selection of wire cross section
The cross section of the overhead transmission line conductor is generally selected according to the economic current density, and should be checked according to the heating conditions, voltage loss, mechanical strength and corona in the event of an accident. When necessary, it is determined through technical and economic comparison; but for lines of 110KV and below, corona is often not the decisive factor in selecting the conductor cross section.
1) Choose the wire section according to the economic current density
According to the economic current density to select the transmission capacity used for the conductor cross-section, the development plan of the power system should be considered for 5-10 years after the line is put into operation. In the calculation, the maximum load that frequently recurs under the normal operation mode must be adopted. But when the system is not clear, care should be taken not to make the wire cross section too small.
2) Check the cross-section of the wire according to the corona condition
With the continuous increase of operating voltage in my country, the probability of corona and discharge of wires, insulators and fittings has increased. For the cross-section of wires of 220KV and above voltage lines, corona conditions often play a major role.
The corona generated by the wire will bring about two undesirable consequences: ① It increases the power loss of the power transmission line; ② It interferes with radio communication and carrier communication.
Regarding the corona loss, if the corona loss of the transmission line is directly calculated, the advantage is that the concept of quantity is very clear, but the disadvantage is that the calculation is cumbersome. This method is rarely used at present. It tends to be measured by the ratio of the maximum working electric field strength Em (unit: KV/cm) of the wire to the critical electric field strength E0 of the overall corona. The ratio of Em/E0 should not be greater than 80%-85%.
How to choose cable's nominal cross sectional area?
1. Select the cable cross-sectional area according to the long-term allowable current-carrying capacity
1.1 In order to ensure safety and the service life of the cable, the temperature of the cable after power-on should not exceed the specified long-term allowable working temperature. The temperature is 70 degrees for polyvinyl chloride insulated cables and 90 degrees for XLPE insulated cables. According to this principle , It's very simple to look up the table and choose the cable.
1.2 Examples:
A certain factory has a transformer capacity of 2500KVa and uses 10KV power supply. If XLPE insulated cables are used to lay in the bridge, what is the cross-sectional area of the cable?
Step 1: Calculate the rated current 2500/10.5/1.732=137A
Step 2: Check the cable selection manual to know
YJV-8.7/10KV-3X25 current carrying capacity is 120A
YJV-8.7/10KV-3X35 current carrying capacity is 140A
Step 3: Choose YJV-8.7/10KV-3X35 with a cable carrying capacity greater than 137A, which can theoretically meet the requirements. Note: This method does not consider the requirements of dynamic stability and thermal stability.
2. Choose the cable cross-sectional area according to the economic current density
Simply understand the economic current density. The cross-sectional area of the cable affects the line investment and power loss. In order to save investment, it is hoped that the cable cross-sectional area should be smaller; in order to reduce the power loss, it is hoped that the cable cross-sectional area should be larger; based on the above considerations, determine a reasonable one The cross-sectional area of the cable is called the economic cross-sectional area, and the corresponding current density is called the economic current density.
3. Select the cable cross-sectional area according to the voltage drop of the power grid
When we use the first and second methods to select the cross-sectional area of the cable, if the cable is very long, a certain voltage drop will occur during operation and startup, and the voltage on the device side will be below a certain range, which will cause the device to heat up.
4. Select the cross-sectional area of the cable according to the thermal stability coefficient (that is, select the cross-sectional area of the cable according to the short-circuit current)
4.1 When the 0.4KV cable is protected by an air switch, the general cable can meet the thermal stability requirements, so there is no need to verify it according to this method.
4.2 For cables above 6KV, after selecting the cross-sectional area of the cable using the above method, you must verify whether it meets the thermal stability requirements according to the following formula. If it does not meet the requirements, choose a larger cross-sectional area.
Formula: Smin=Id×√Ti/C
Among them, Ti is the breaking time of the circuit breaker, which is 0.25S, C is the thermal stability coefficient of the cable, which is 80, and Id is the three-phase short-circuit current value of the system.
For example: when the system short-circuit current is 18KA, how to choose the cable cross-sectional area.
Smin=18000×√0.25/80=112.5
Conclusion: If the system short-circuit current reaches 18KA, even if the rated current of the equipment is smaller, the cable cross-sectional area should not be less than 120mm2.
Features Of Aerial Bundled Cable
Overhead insulated cable has the main characteristics of high power supply reliability, good power supply safety, convenient erection and maintenance and reasonable economy
1. High power supply reliability. The use of overhead cable can greatly reduce all kinds of short-circuit faults (especially the common flashover faults of overhead bare conductor), and the fault rate is 4-6 times lower than that of overhead bare conductor.
2. Good power supply security. When the overhead cable is energized, when the human body or other animals accidentally touch the cable insulation surface, as long as the cable is not broken down, it will not cause harm to people and animals.
3. Convenient erection and maintenance. Overhead cables can be erected on any kind of pole and tower or along the wall. In special cases, they can also pass through the trees and be directly fixed on the tree pole with hardware. There is no need for special patrol inspection, and there will be no short-circuit tripping accident due to branch flashover, littering by residents, or false collision of crane boom, which greatly reduces the maintenance and overhaul of the line.
4. Reasonable economy. Although the overhead cable is more expensive than the overhead bare conductor, it is cheaper than the ordinary underground installation cable. Therefore, although the one-time investment of overhead cable is slightly higher, combined with other factors, its operation cost will be significantly lower than that of overhead bare conductor.
Zhenglan Cable Technology Co., Ltd can produce different types of aerial insulated cable as per different standards inculding IEC, NFC-33109, AS NZS3560, etc.. Welcome your inquiry.
What is a waterproof cable?
Cables that can be normally used in water are collectively referred to as water blocking (waterproof) power cables. When the cable is laid underwater, it is often immersed in water or wet places, the cable is required to have the function of water prevention (resistance), that is, it is required to have the function of full water resistance, so as to prevent water from immersing into the cable and causing damage to the cable and ensure the long-term stable operation of the cable under water. The difference between waterproof cable and ordinary cable is that ordinary cable cannot be used in water.
Waterproof cables mainly fall into the following three categories:
An oil paper insulated cable is the most typical water-resistant cable. Its insulation and conductor are filled with cable oil, and there is a metal sheath (lead sheath or aluminum sheath) outside the insulation. It is the cable with the best water resistance. In the past, oil paper insulated cables were mostly used for submarine (or underwater) cables, but oil paper insulated cables are limited by the drop, which has the trouble of oil leakage and inconvenient maintenance. Now they are used less and less.
Second, the ethylene propylene rubber insulated cable widely used in medium and low voltage underwater transmission lines is due to its superior insulation performance without the worry of "water tree". Waterproof rubber sheathed cable (JHS type) can operate safely in shallow water for a long time.
Three crosslinked polyethylene (XLPE) insulated power cable has become the most widely used insulating material because of its excellent electrical, mechanical and physical properties, simple production process, light structure, large transmission capacity, convenient installation, laying and maintenance, and not limited by drop. However, it is particularly sensitive to moisture. If the insulation is soaked with water during manufacturing and operation, It is prone to "water tree" breakdown, which greatly shortens the service life of the cable. Therefore, XLPE insulated cables, especially medium and high voltage cables under AC voltage, must have "water blocking structure" when used in water environment or humid environment. The so-called "water blocking structure" includes radial water blocking structure and longitudinal water blocking structure.
Characteristics and application occasions of fire-resistant and flame-retardant cables
1. fire-resistant XLPE insulated, PVC sheathed power cable
It can be laid indoors, in tunnels and pipelines, and can withstand certain laying traction, but the cable cannot bear external force, and single-core cable is not allowed to be laid in magnetic material pipelines. If you need to bear the external force of machinery and wrap the steel tape armour.
Suitable for special requirements, such as large-capacity power plants, nuclear power plants, underground railways, high-rise buildings, etc.
2. XLPE insulated, PVC sheathed power cable
It can be laid indoors, in tunnels and in pipelines, and can withstand certain laying and traction, but the cable cannot bear external force, and single-core cable is not allowed to be laid in magnetic material pipelines. If you need to bear the external force of machinery and wrap the steel tape armour.
3. Flame retardant PVC insulated, PVC sheathed power cable
It can be laid indoors, tunnels, cable trenches, pipelines, flammable and severely corroded places, but cannot bear external mechanical forces. If you need to bear the external force of machinery and wrap the steel tape armour.
Features: In the case of open flame burning, remove the fire source, ≤ 12S automatic extinguishing.
4. Flame retardant cross-linked polyethylene insulated, polyvinyl chloride fuel sheathed power cable
It can be laid indoors, in tunnels and pipelines, and can withstand certain laying traction, but the cable cannot bear external force, and single-core cable is not allowed to be laid in magnetic material pipelines. If you need to bear the external force of machinery and wrap the steel tape armour.
Features: In the case of open flame burning, remove the fire source, ≤ 12S automatic extinguishing.
5. Fire-resistant PVC insulated, PVC sheathed power cable
It can be laid indoors, tunnels, cable trenches, pipelines, flammable and severely corroded places, but cannot bear external mechanical forces. If you need to bear the external force of machinery and wrap the steel tape armour. Suitable for special requirements, such as large-capacity power plants, nuclear power plants, underground railways, high-rise buildings, etc.
Water blocking cable design and their benefits
With the deepening of research and understanding of insulation water absorption and water tree, people are more and more aware of the importance of waterproof performance for medium and high voltage power cables. In areas where the groundwater level is high or rainy all the year round (such as the area south of the Yangtze River in China). More and more users have put forward waterproof requirements for cables. Most of the power cables are directly buried, so the cables are very likely to suffer from soil pressure and external force damage due to human factors.
From the perspective of laying forms, most foreign countries use metal protective sheaths for mechanical protection and waterproofing, or use cables covered with thin metal tapes and other waterproof layers. However, once this kind of cable is damaged, water will invade the inside of the cable from the damage, and then penetrate into the gap inside the cable (between conductor strands, extruded semi-conductive layer, shielding layer or metal sheath, etc.). Extend longitudinally along the cable, making long cables unusable. When the directly buried cable fails, a new cable is usually replaced at the point of the accident to restore the line. Therefore, once water penetrates into the cable, the water seepage distance should be as short as possible. In order to prevent water seepage after immersion, generally The gap part is used to wrap the water-absorbing swelling material, once it is immersed in water, the gap can be easily blocked.
Generally, the sheath material used in cables is polyvinyl chloride, and polyvinyl chloride molecules are polar. Polar water molecules can easily penetrate into the cable through the polyvinyl chloride layer. At present, it is necessary to realize the longitudinal water-blocking technology of the cable. There is no problem with the above, as long as a layer of water-blocking material made of water-tight material is added to the jacket. The currently commonly used method is to squeeze a layer of medium-high density PVC inner jacket in the PVC outer jacket or longitudinally wrap a layer of aluminum-plastic composite tape as the longitudinal water-blocking isolation jacket.
Polyethylene is easy to absorb water under an alternating electric field, which does not mean that the water tightness of the polyethylene material is not good. The water tightness of polyethylene material is hundreds of times higher than that of polyvinyl chloride. The extruded polyethylene water blocking layer and a layer of moisture-absorbing cushion (such as water blocking tape) can meet the longitudinal resistance of cables laid in general humid environments. Water and moisture-proof requirements. The use of polyethylene material in the water-blocking isolation sleeve is relatively simple in process, and it can be realized without adding any production equipment. Because the polyethylene layer is only used as a water-blocking layer without considering its mechanical strength and other factors, a good effect can be achieved when its thickness is 1.0~1.5mm during process design due to cost and process considerations.
Water blocking tape (yarn) can quickly swell in contact with water and reach a certain swelling height and can form a high-strength gel. It is an ideal active water blocking material, using water blocking tape, water blocking rope, and water blocking As a water-blocking material, yarn has simple process and convenient construction and high production efficiency. Therefore, this structure is generally welcomed by users and manufacturers. Because the contact surface between the single-core cable insulation and the sheath is relatively flat, as long as it is between the outer sheath and the core Wrap a layer of water blocking tape to achieve a good longitudinal water blocking effect. If there is a metal shield, you need to wrap the semi-conductive resistance hose on the inner side of the metal shield. Multi-core cables also need to be effectively filled with water-blocking ropes and water-blocking yarns in the gaps between the cable cores, and then wound with water-blocking tapes. For cables with armored layers, it is also necessary to use two layers inside and outside the armoring layer. A layer of water blocking tape is wrapped around each side.
Zhenglan Cable Technology can meet your special requirements in cable's water prevention. Welcome your inquiry.
Characteristics of PVC plastics used in wire and cable
PVC cable plastic can be divided into insulation grade cable material and protective cable material according to its different use in wire and cable.
Types and characteristics of PVC plastics for insulation
General insulation grade: has certain electrical insulation performance, good softness, atmospheric resistance and low cost
Heat resistant insulation grade: it has better heat-resistant aging and deformation resistance, and has better electrical insulation performance
High electrical performance insulation grade: better electrical insulation performance, high insulation resistance, good dielectric performance, and certain heat resistance
Oil resistant and solvent insulation grade: it has good oil resistance, solvent resistance and softness, and good electrical insulation performance
Flame retardant insulation grade: good electrical insulation performance, high flame resistance and softness
Types and characteristics of PVC plastics for sheath
PVC plastic coating has good corrosion resistance, sufficient mechanical properties, certain atmospheric resistance, soft, vibration resistance, light weight, easy processing and laying.
General protection level: sufficient mechanical strength, heat resistance, light aging and cold resistance are good.
Good heat resistance:
Cold protection level: high cold resistance, low soft
Soft protection level: it has high softness and good cold resistance
Heat resistant protection level: good heat resistance
Oil resistant protection level: good oil resistance and chemical resistance
Easy to tear protection level: low tear resistance, easy to lay and low price
Mould, termite and rodent protection levels: good biological resistance, termite and mildew resistance
Fire retardant protection level: good combustion resistance
Zhenglan Cable Technology Co., Ltd can do PVC insulated and PVC sheathed cable and wire. Welcome your inquiry.
Basic cable knowledge
I. Basic introduction of wires and cables
Wire and Cable: it is usually twisted by several or several groups of wires [at least two in each group], similar to ropes. Each group of wires is insulated from each other and often twisted around a center. The whole outside is covered with a highly insulated covering layer. It is mostly used to transmit, distribute electric energy or transmit electrical signals.
Wires and Cables are mainly composed of the following four parts
1. Conductive wire core: made of high conductivity material (copper or aluminum). According to the requirements of laying conditions for cable softness, each core may be stranded by a single wire or multiple wires.
2. Insulation layer: insulation material used as cable should have high insulation resistance. Insulation material commonly used in cables include oil-immersed paper, polyvinyl chloride, polyethylene, cross-linked polyethylene, rubber, etc.
3. Sealed jacket: protect the insulated wire core from mechanical, moisture, moisture, chemicals, light, etc. For insulation that is prone to moisture, lead or aluminum is generally used to squeeze sealed jacket.
4. Protective Cover: used to protect sealed jacket from mechanical damage. Galvanized steel strip, steel wire, copper strips wire, copper wire, etc. are generally used as armor to wrap around the sheath (called armored cable), and the armored layer can shield the electric field and prevent the interference of external electromagnetic waves at the same time. In order to avoid the corrosion of steel strips and steel wires by the surrounding medium, they are usually coated with asphalt or wrapped with impregnated jute layer or extruded polyethylene and polyvinyl chloride sleeve.
II. Wire and Cable Specifications
Wire and Cable specifications are the meaning of the representation of the number of cores and cross-sectional dimensions of wires and cables. The complete naming of wires and cables is usually more complicated, so people sometimes use a simple name (usually a category name) combined with model specifications to replace the complete name, for example, "Low Voltage Cable" represents all plastic insulated power cables of 0.6/1kV level. The type spectrum of the cable is relatively perfect. It can be said that as long as the standard model specifications of the wire and cable are written, the specific products can be clearly defined.
III. Application classification of wires and cables
(1) classified by insulation material, such as oil-immersed paper insulated cables, polyvinyl chloride cables, XLPE cables, etc.
(Ii) classified by purpose, divided into power cable, communication cable and control cable, etc. It is applied to power system, information transmission system, mechanical equipment and instrument system respectively.
1. Power system
Wire and cable products used in power system mainly include overhead bare wire, busbar (bus), power cable (plastic cable, oil paper power cable (basically replaced by plastic power cable), rubber-sleeve cable, overhead insulated cable), branch cables (replacing some bus bars), electromagnetic wire, electrical equipment wires and cables for power equipment, etc.
2. Information transmission system
The wires and cables used in information transmission system mainly include local cable, TV cables, electronic cables, radio frequency cables, optical fiber cables, data cables, electromagnetic wire, power communication or other composite cables.
3. Mechanical equipment, instrumentation system
Almost all products except overhead bare wires in this part have applications, but they are mainly power cables, electromagnetic wire cables, data cables, instrument cables, etc.
(3) according to product classification, it is divided into five categories
1. Bare wire and bare conductor products
The main features of this product are: pure conductor metal, no insulation and sheath layer, such as steel core aluminum stranded wire, copper aluminum busbar, electric locomotive wire, etc.; The processing technology is mainly pressure processing, such as smelting, calendering, drawing, stranding/compact stranding, etc.; Products are mainly used in suburbs, rural areas, user main lines, switch cabinets, etc.
2. Power cable
The main features of this kind of products are: Squeezing (winding) insulation layer outside the conductor, such as overhead insulated cable, or several core stranded (corresponding to the phase line, zero line and ground line of the power system), for example, more than two-core overhead insulated cables, or add a sheath layer, such as plastic/rubber cover wire and cable. The main technologies include drawing, stranding, insulation extrusion (wrapping), cable forming, armour, sheath extrusion, etc. Different process combinations of various products have certain differences.
The products are mainly used in the transmission of strong electric energy in the transmission, distribution, transmission, transformation and power supply lines, with large current (tens of to thousands of) and high voltage (220V to 500kV and above).
3. Wires and cables for electrical equipment
The main features of this kind of products are: there are a wide range of variety and specifications, wide range of application coverage, and the operating voltage is more than 1kV. In the face of special occasions, new products are constantly derived, such as fire-resistant cables, Flame Retardant Cables, low smoke halogen-free/low smoke halogen-free cables, termite-proof, mouse-proof cables, oil-resistant/cold-resistant/temperature-resistant/wear-resistant cables, medical/agricultural/mining cables, thin-walled wires, etc.
4. Communication cable and optical fiber
From the simple telephone and telegraph cables in the past to thousands of pairs, coaxial cables, optical cables, data cables, and even combined communication cables. The structure and size of this kind of products are usually small and uniform, and the manufacturing precision is required to be high.
5. Electromagnetic wire (winding wire)
It is mainly used for various motors, instruments and meters, etc.
4. What is the difference between wire and cable?
In fact, there is no strict boundary between "wire" and "cable. Generally, products with small core number, small product diameter and simple structure are called wires, those without insulation are called bare wires, and others are called cables; Those with large conductor cross-sectional area (greater than 6 mm²) are called large wires, smaller (less than or equal to 6 mm²) is called small cord, and insulated electric conductor is also called covered wire. However, with the expansion of the scope of use, many varieties of "cable with Cable" and "cable with Cable". Therefore, there is no need to strictly distinguish. In daily habits, people call household covered wire and power cable for short.
The wire is composed of one or several soft wires, and the outer bread has a light and soft protective layer; The cable is composed of one or several insulated covered wires, the outside is wrapped with a tough outer layer made of metal or rubber. Cables and wires are generally composed of core wire, insulation foreskin and protective sheath.
What is the difference between flame retardant cable and low smoke halogen free flame retardant cable?
Low smoke halogen-free cable refers to the environment-friendly cable which is made of glue without halogen (F, Cl, Br, I, at), lead, cadmium, chromium, mercury and other environmental substances, and will not emit toxic smoke when burning.
Low smoke and halogen-free cable, with superior flame retardant performance, little smoke when burning and no corrosive gas escaping, is widely used in nuclear power stations, subway stations, telephone exchanges and computer control centers, high-rise buildings, hotels, radio and television stations, important military facilities, petroleum platforms, etc., as well as places with concentrated personnel and low air density.
Characteristics of low smoke halogen free wire:
(1) The tensile strength of general PVC wires is greater than 1.05kgf/mm2, while that of low smoke halogen-free wires is greater than 1.2kgf/mm2;
(2) It has good weather resistance (- 30 ℃ ~ 105 ℃);
(3) It has good softness (hardness 80-90);
(4) It has non mobility (because there is no need to add plasticizer in this product formula, so it will not have mobility);
(5) There will be no toxic black smoke (a small amount of white smoke) during combustion;
(6) The volume resistivity of PVC wire is 1012 ~ 1015 Ω / cm3, and that of LSZH wire is more than 1016 Ω / cm3;
(7) It has good high-voltage resistance characteristics: PVC wires are generally resistant to more than 10kV, while low smoke halogen-free wires are up to more than 15kV;
(8) It has good elasticity and viscosity.
Flame retardant cable refers to the cable that the sample is burned under the specified test conditions, the flame spread is only within a limited range after removing the test fire source, and the residual flame or residual ignition can be extinguished within a limited time. The basic characteristic is: in case of fire, it may be burnt out and cannot operate, but it can prevent the spread of fire. Generally speaking, in case of wire fire, the combustion can be limited in a local scope, without spreading, and other equipment can be kept to avoid greater losses.
The general method of flame retardant wire and cable is to add halides and metal oxides containing halogen in the sheath material. From the perspective of flame retardant, this is an excellent method. However, because these materials contain halides, a large amount of smoke and hydrogen halide gas are released during combustion, so the visibility in case of fire is low, which brings great challenges to the safe evacuation and fire fighting of personnel People are more likely to suffocate to death by toxic gases.
Now, low smoke halogen-free cable is being promoted to replace the general flame retardant cable. Generally, the price of flame retardant cable is about 8500 yuan per ton, while the price of low smoke halogen-free cable is more expensive.
What are the main factors that affect copper prices?
The factors affecting copper prices include supply, demand, bulk commodity spot sales, market pressure, and current inventory levels etc.,
1. Supply and demand
According to the principle of economics, when the supply of a commodity exceeds the demand, its price will fall, otherwise it will rise. At the same time, price will affect supply and demand in turn. When commodity prices rise, supply will increase and demand will decrease. On the contrary, demand will rise and supply will decrease. Therefore, price and supply and demand will affect each other.
An important index reflecting the relationship between supply and demand is inventory, which is generally measured by stock exchange.
2. economic situation
Copper is an important industrial raw material, and its demand is closely related to the economic situation. When the economy grows, the copper demand increases, which leads to the rise of copper price. When the economy is depressed, the copper demand shrinks and the copper price falls.
3. Import and export policy
The import and export policy, especially the tariff policy, is an important means to balance the domestic supply and demand by adjusting the import and export cost of a commodity and controlling the import and export volume of a commodity.
4. Change of development trend of copper industry
Consumption is the direct factor affecting copper price, and the development of copper industry is an important factor affecting consumption. With the rapid development of science and technology, the application scope of copper is constantly expanding, and copper has begun to play a role in the fields of medicine, biology, superconductivity and environmental protection. All of these will affect copper consumption in varying degrees.
5. Production cost of copper
Production cost is the basis of measuring commodity price level. The production cost of copper includes smelting cost and refining cost. The most common economic analysis is to adopt "cash flow break even cost", which decreases with the increase of by-product value.
6. Trading direction of funds
Although the fund industry has a long history, it did not develop vigorously until the 1990s. At the same time, the degree of fund participation in commodity futures trading has also increased significantly. From the evolution of copper market in recent ten years, the fund has played an important role in many big market.
Of course, there are also similar exchange rates will have a certain impact on copper prices, but the fundamental factor determining the trend of copper prices is the relationship between supply and demand of copper
What’s the Difference Between ACSR and AAAC cable?
Following are some Q&A people interested about wire and cables:
1. What types of commonly used wires and cables are classified by purpose?
Answer: According to the purpose, it can be divided into bare conductors , insulated wires, heat-resistant wires, shielded wires, power cables, control cables, communication cables, radio frequency cables, etc.
2.What is the difference between ACSR cable and AAAC cable?
AAAC:This bare concentric-lay-stranded conductor, made from round aluminum alloy 6201 -T81 wires, is constructed with a central core surrounded by one or more layers of helically laid wires.
it provide better corrosion resistance than the one produced by the aluminum conductor steel reinforced(ACSR).
ACSR: This bare concentric-lay-stranded conductor is made from round aluminum 1350-H19 (extra hard) wires and round zinc-coated or aluminum-coated steel core wire(s) to be used as overhead electrical conductors.it provides better strength than AAAC cable.
3. What kinds of insulated wires are there?
Answer: There are the following types of insulated wires: PVC insulated wires, PVC insulated cords, nitrile and polyvinyl chloride compound insulated cords, rubber insulated wires, direct buried aluminum core plastic insulated wires for agricultural use, and rubber insulated cotton yarn Textile cords, PVC insulated nylon sheathed wires, PVC insulated cords for power and lighting, etc.
4. What kind of occasion is the cable tray suitable for?
Answer: The cable tray is suitable for the overhead laying of power cables and control cables indoors and outdoors in general industrial and mining enterprises, and can also be used for indoor and outdoor installations in telecommunications, radio and television departments.
5. What are the cable accessories?
Answer: Commonly used electrical accessories include cable terminal junction box, cable intermediate junction box, connecting pipe and terminal block, steel plate junction box, cable tray, etc.
6. What is the cable middle connector?
Answer: The device that connects the cable and the cable’s conductor, insulation shielding layer and protective layer to connect the cable line is called the cable intermediate joint.
7. What is electrical main wiring?
Answer: The electrical main wiring is the connection method of the main electrical equipment and the bus in power plants and substations, including the connection of the main bus and the auxiliary power system according to certain functional requirements.
8.When choosing the cross section of the power cable, which regulations should be followed?
Answer: The selection of power cables should follow the following principles:
(1) The rated voltage of the cable should be greater than or equal to the rated voltage of the power supply system at the installation point;
(2) The continuous allowable current of the cable should be equal to or greater than the maximum continuous current of the power supply load;
(3) The cross-section of the core must meet the requirements of stability of the power supply system when it is short-circuited;
(4) Check whether the voltage drop meets the requirements according to the cable length;
(5) The minimum short-circuit current at the end of the line should enable the protection device to operate reliably.
9. What are the advantages of XLPE cables and oil-paper cables?
Answer:
(1) Easy to install, because it allows a small minimum bending radius and light weight;
(2) Not restricted by line drop;
(3) Good thermal performance, high allowable working temperature and large transmission capacity;
(4) The cable accessories are simple and all are dry structure;
(5) Simple operation and maintenance, no oil leakage problem;
(6) The price is lower;
(7) High reliability and low failure rate;
(8) There are few manufacturing procedures, simple process and remarkable economic benefits.
DIFFERENCE BETWEEN WIRE, CABLE, CONDUCTOR AND OTHER TERMINOLOGIES BASICS
Wire. A slender rod or filament of drawn metal. (This definition restricts the term wire to what would ordinarily be understood by the term solid wire. In the definition the word slender is used in the sense that the length is great in comparison with the diameter.
If a wire is covered with insulation, it is properly called an insulated wire, although the term wire refers primarily to the metal; nevertheless, when the context shows that the wire is insulated, the term wire will be understood to include the insulation.)
Conductor. A wire or combination of wires not insulated from one another, suitable for carrying a single electric current. (The term conductor does not include a combination of conductors insulated from one another, which would be suitable for carrying several different electric currents. Rolled conductors, such as busbars, are, of course, conductors but are not considered under the terminology given here.)
Stranded Conductor. A conductor composed of a group of wires or any combination of groups of wires. (The wires in a stranded conductor are usually twisted or braided together.)
Cable. A stranded conductor (single-conductor cable) or a combination of conductors insulated from one another (multiconductor cable). The component conductors of the second kind of cable may be either solid or stranded, and this kind may or may not have a common insulating covering. The first kind of cable is a single conductor, while the second kind is a group of several conductors.
Strand. One of the wires or groups of wires of any stranded conductor.
Stranded Wire. A group of small wires used as a single wire. (A wire has been defined as a slender rod or filament of drawn metal. If such a filament is subdivided into several smaller filaments or strands and is used as a single wire, it is called stranded wire.
There is no sharp dividing line of size between a stranded wire and a cable. If used as a wire, for example in winding inductance coils or magnets, it is called a stranded wire and not a cable. If it is substantially insulated, it is called a cord, defined below.)
Cord. A small cable, very flexible and substantially insulated to withstand wear. (There is no sharp dividing line in respect to size between a cord and a cable and likewise no sharp dividing line in respect to the character of insulation between a cord and a stranded wire.)
Concentric Strand. A strand composed of a central core surrounded by one or more layers of helically laid wires or groups of wires.
Some power related strategies taken by State Grid Corporation of China
This year's "11" golden week (October 1-8) nationwide average daily power generation of 18.367 billion kwh, an increase of 4.79% compared with last year's holiday (October 1-7).
As a key state-owned enterprise in the energy and power industry, SGCC firmly implements the new energy security strategy of "four revolutions and one cooperation", takes ensuring the safe operation and reliable power supply of the power grid as the top priority, speeds up the construction of power infrastructure, complements the weak points and forging the long ones, stabilizes the economy and benefits the people's livelihood, continuously meets the power needs of the people for a better life and gives full play to the basic guarantee Function, smooth domestic circulation, accumulate basic strength for economic development.
Since then, the national power grid construction project of Hebei qianxiong hydropower station has been put into operation, and the national power grid construction project of 800 kV in Hebei Dongxiong power grid has been put into operation A large number of key power grid projects have effectively driven the upstream and downstream enterprises to resume work and production, providing safe and reliable power guarantee for social development and injecting surging momentum into economic operation.
In the first three quarters of this year, 36502km and 205.44 million KVA power grid infrastructure projects of the State Grid of China were put into operation, accounting for 74% of the annual plan; 32895km and 201060000 KVA were started, accounting for 67% of the annual task, creating favorable conditions for the overall completion of the annual construction tasks.
As a safeguard of the national economy, it is an important task for the State Grid Corporation of China to serve the main body of the market well. In 2020, the State Grid Corporation of China will resolutely implement the national electricity price reduction policy. It is estimated that the annual electricity tariff reduction will be about 92.6 billion yuan, and the social energy cost will be reduced.
Recently, the State Grid Corporation of China (SGCC) has issued nine measures to comprehensively improve the service level of "access to electricity", which will save more than 100 billion yuan of investment for enterprises in three years. Previously, State Grid Corporation of China has issued ten service guarantee measures to further improve power supply service and support 5g development.
State Grid Corporation of China firmly implements the new energy security strategy of "four revolutions and one cooperation", unswervingly follows the path of grid development with Chinese characteristics, promotes the construction of a clean, low-carbon, safe and efficient energy system, and empowers beautiful China.
The State Grid Corporation of China (SGCC) has taken various measures to promote the development of clean energy and ensure that the utilization rate of hydropower, wind power and solar power is above 95% throughout the year.This year's "11" golden week (October 1-8) nationwide average daily power generation of 18.367 billion kwh, an increase of 4.79% compared with last year's holiday (October 1-7).
As a key state-owned enterprise in the energy and power industry, SGCC firmly implements the new energy security strategy of "four revolutions and one cooperation", takes ensuring the safe operation and reliable power supply of the power grid as the top priority, speeds up the construction of power infrastructure, complements the weak points and forging the long ones, stabilizes the economy and benefits the people's livelihood, continuously meets the power needs of the people for a better life and gives full play to the basic guarantee Function, smooth domestic circulation, accumulate basic strength for economic development.
Since then, the national power grid construction project of Hebei qianxiong hydropower station has been put into operation, and the national power grid construction project of 800 kV in Hebei Dongxiong power grid has been put into operation A large number of key power grid projects have effectively driven the upstream and downstream enterprises to resume work and production, providing safe and reliable power guarantee for social development and injecting surging momentum into economic operation.
In the first three quarters of this year, 36502km and 205.44 million KVA power grid infrastructure projects of the State Grid of China were put into operation, accounting for 74% of the annual plan; 32895km and 201060000 KVA were started, accounting for 67% of the annual task, creating favorable conditions for the overall completion of the annual construction tasks.
As a safeguard of the national economy, it is an important task for the State Grid Corporation of China to serve the main body of the market well. In 2020, the State Grid Corporation of China will resolutely implement the national electricity price reduction policy. It is estimated that the annual electricity tariff reduction will be about 92.6 billion yuan, and the social energy cost will be reduced.
Recently, the State Grid Corporation of China (SGCC) has issued nine measures to comprehensively improve the service level of "access to electricity", which will save more than 100 billion yuan of investment for enterprises in three years. Previously, State Grid Corporation of China has issued ten service guarantee measures to further improve power supply service and support 5g development.
State Grid Corporation of China firmly implements the new energy security strategy of "four revolutions and one cooperation", unswervingly follows the path of grid development with Chinese characteristics, promotes the construction of a clean, low-carbon, safe and efficient energy system, and empowers beautiful China.
The State Grid Corporation of China (SGCC) has taken various measures to promote the development of clean energy and ensure that the utilization rate of hydropower, wind power and solar power is above 95% throughout the year.
Video
